***************************************************************************************************************************************************
THICKNESS GAUGE
|
|
|
_clip_image002.jpg)
_clip_image004.jpg)
_clip_image006.jpg)
Determination of thickness of fabric/rubber/paper,leather etc is considerable importance, both for assuring conformity with design parameters and for evaluation of various physical properties determination of thickness of fabric sample in laboratory is usually carried out with the help of a bench thickness gauge .The fabric component whose thickness is to be determined is kept on a flat anvil and a circular indenter is pressed onto it from the top under a specified pressure .the contact faces of the anvil and the indenter are ground flat and set in planes parallel to each other .
The “ASIAN” Bench Thickness Gauge for fabric consists of a dial micrometer fitted on a digital micrometer fitted on a rigid metallic frame .the micrometer has a flat circular indenter, Which exerts the specified pressure on the fabric sample whose thickness is being measured through a dead weight .the fabric sample is kept on an anvil, which is in from of a flat circular platform. The axis of the indenter and the anvil coincide and is the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the fabric sample with the help of a lifting lever.
TECHNICAL DATA
Range of measurement : 0 –10mm
Least count of dial gauge : 0 .01
Diameter of anvil : 50 mm approximately
Diameter of indenter : 10 mm
Pressure on indenter : 100 gm/cm²
Throat depth : 50mm
|